Available from our showroom, complete in its original box and in like-new condition. Full warranty.
Since alarm signals must be transmitted quickly, communication with the outside world is of the utmost importance for alarm system control panels. The new Ajax control panel ensures stable and flawless communication.
The Hub’s intelligent control panel is a key component of the Ajax security system. The device monitors the operation of all Ajax detectors and immediately sends an alarm signal to the owner and the monitoring station.
Operating
Principle: The device collects information about the detector’s operation in an encrypted format, analyzes the data, and, in the event of an alarm, alerts the system owner and the monitoring center in just a few milliseconds.
Immediate Communication with Users and the Alarm Monitoring Company
Communication with the outside world is crucial for alarm system control panels because it enables alarm signals to be delivered quickly. The new Ajax control panel ensures extremely stable communication.
Hub 2 Plus is equipped with a connection featuring 4 independent channels, including LTE. With this configuration, you can connect the device via Ethernet and Wi-Fi to two separate internet service providers, while two mobile networks serve as a backup. Switching between channels happens seamlessly in just a few seconds.
Photo-based alarm verification in 9 seconds
Photo verification is the very latest innovation in the security industry. This technology is the perfect solution for both commercial and residential buildings: it’s accessible and respects your privacy. Users and CMS operators can assess the situation in real time using animated photo sequences from the MotionCam detectors. However, cameras are only triggered in response to alarms, never on demand.
Hub 2 Plus can manage up to 200 MotionCam detectors and send photo confirmations of alarms to users and security companies in just 9 seconds, even when SIM cards are used for communication, thanks to LTE support.
Automated Security
Hub 2 Plus supports 64 scenarios that minimize human intervention in a location’s security. It can automatically arm and disarm the entire security system or specific groups according to a schedule. In addition, the system can immediately activate a smoke alarm in the event of a break-in, cut off the power supply and turn on emergency lighting in the event of a fire, or shut off the water supply in the event of a leak. Using automation devices, Hub 2 Plus can control lighting, electric locks, and roller shutters. Scenarios can be triggered in response to changes in security mode, alarm activation, or commands from Button.
Security for large properties with complex internal layouts
Business centers, factories, and multi-story villas with outbuildings—Hub 2 Plus can secure even the most complex properties. The new hub manages up to 200 devices. The new hub’s radio signal can reach up to 2,000 meters, while the radio network can cover up to 35 km². Hub 2 Plus can manage 25 security groups with a total of 200 users. This allows security personnel to divide large buildings into zones and clearly organize access for staff.
Tamper-Resistant
No matter what happens to Hub 2 Plus, the security company and users will always receive a notification. If intruders attempt to disconnect the device, a tamper alarm will sound. If the Ajax Cloud server loses connection with a hub, it sends a notification in just 60 seconds thanks to short ping intervals. Even during a power outage, Hub 2 Plus continues to secure the building for up to 15 hours using its built-in backup battery.
- Device polling interval: 12 seconds
- Detection of connection loss with the hub in 60 seconds
- Up
to 15 hours of backup battery operation
Future-proof
Hub 2 Plus runs on OS Malevich, a real-time operating system developed by Ajax Systems. OS Malevich is extremely stable, immune to viruses, and protected against cyberattacks.
OS Malevich is constantly updated thanks to its modular architecture. The system receives new features several times a year via over-the-air software updates. No installers or users are required for the process, and implementation takes only a few minutes—but only when the security system is disabled.
Hub 2 Plus is Ajax’s most efficient control panel. It features a processor that is 4.5 times faster than Hub 2 and has 8 times more flash memory. With this hardware configuration, the device will operate for years and remain up to date.
Controlled via apps We deliberately chose not to add buttons to our control panel or use outdated interfaces. Apps are more convenient and secure. They connect to a hub via a secure channel to the Ajax Cloud—our server solution located in various AWS data centers. With apps, users can manage security, edit hub settings, configure connected devices, create scenarios, and monitor events—all from a smartphone or PC, whether at home or on the go.
Hassle-Free Installation
Hub 2 Plus works right out of the box. The system comes with pre-installed connections, a power supply, and a backup battery. Setting up the system requires just a few simple steps. Plug the device into an outlet, connect it to the internet, insert the SIM cards, and scan the QR code using the app. Thanks to SmartBracket, you don’t need to disassemble the device for mounting.
All security system settings are always available in the app. Even if you’re far away from the hub, you can connect security devices or CCTV cameras, add users, test the strength of the radio signal, create security groups and scenarios, or connect a hub to a security company.
